TreadPlus Learning Center
The professional knowledge base for wheel service.
Learn the theory, diagnose the complaint, perform the work and verify the result with practical technical guidance.
Start with the work in front of you
Move from knowledge to action.
Use a structured entry point instead of searching through an undifferentiated list of articles.
Learn
Build the theory behind alignment geometry, tire service, inspection and workshop measurement.
Start with fundamentals02Diagnose
Start with a symptom, confirm the mechanical condition and use measurements to narrow the cause.
Open diagnostic pathways03Repair
Follow controlled adjustment and verification procedures after the cause has been confirmed.
Open repair proceduresTechnical libraries
Browse by discipline.
Detailed articles, diagrams, procedures and direct answers for the equipment and services used in a professional wheel-service bay.
Wheel Alignment
Alignment fundamentals, geometry, measurement, adjustment and diagnosis.
Open libraryTechnical libraryTire Inspection
Tread depth, wear diagnosis, damage, aging, reporting and automated inspection.
Open libraryTechnical libraryWheel Balancing
Imbalance, mounting accuracy, wheel weights, runout and correction workflows.
Open libraryTechnical libraryTire Changing
Bead control, machine setup, TPMS handling, inflation and safe tire service.
Open libraryTechnical libraryWorkshop Technology
Camera vision, targets, clamps, calibration, databases and connected bays.
Open libraryTechnical libraryBuying Guides
Equipment selection, bay preparation and complete workshop planning.
Open libraryTechnical libraryTechnical FAQs
Direct answers about accuracy, calibration, accessories, documents and support.
Open libraryTechnician workflow
One connected service process.
Technical content is organized to support the sequence used in the bay, from first principles through final verification.
- 01
Learn
Understand the geometry, component or service principle.
- 02
Diagnose
Connect the customer complaint to an inspection order.
- 03
Inspect
Confirm tires, suspension, equipment setup and references.
- 04
Repair
Correct the verified mechanical or adjustment condition.
- 05
Verify
Remeasure, document and road-test the completed work.
- 06
Plan
Choose equipment and workflow around the work the shop performs.
Role-based access
Find the material that matches the job.
Continue into equipment technology, technician training, workshop planning or inspection knowledge.
How the measurement works
Camera vision, targets, compensation, calibration, bay geometry and vehicle databases.
View resourcesTechnician academyTraining for the work at the bay
Product operation, installation, calibration and technical service training pathways.
View resourcesShop owner centerPlan equipment around the business
Equipment selection, bay preparation and complete wheel-service workshop planning.
View resourcesInspection technologyTurn tire condition into evidence
Tread depth, wear patterns, damage, aging and automated inspection reporting.
View resourcesRecommended starting points
Build the fundamentals first.
Begin with the geometry, inspection and symptom distinctions that support repeatable workshop decisions.
What is wheel alignment?
Understand toe, camber, caster, thrust angle and the references used to measure wheel geometry.
Read the guideTechnical guidePre-alignment inspection
Check tires, suspension, ride height and the measurement bay before making an adjustment.
Read the guideTechnical guideAlignment vs wheel balancing
Separate vehicle-geometry concerns from rotating mass, runout and wheel-mounting problems.
Read the guidePractical training
Take the knowledge into the workshop.
Explore product operation, installation, calibration and technical service training delivered across TreadPlus markets.