Overview
Flush-mount tread inspection for a clean drive-over lane.
TA100FMT is the flush mount configuration for permanent drive-over tire inspection lanes. It uses a base frame and recessed installation for a cleaner lane presentation.
1
Best fitHigh-traffic service lanes, dealerships, inspection stations and permanent tire inspection installations.
2
PlatformTireMetric™
3
Key capabilitiesFlush-mount base frame, laser profiling, optional vehicle identification, Tire Health Report and configured TireMetric™ data interface.
TA100FMT specifications
Published configuration data for buyer evaluation. Final regional specifications, compliance and warranty terms are confirmed on quotation.
| Product category | Tread depth inspection system |
|---|---|
| Model | TA100FMT |
| Software / platform | TireMetric™ with TreadScan™ |
| Measurement accuracy | ±0.2 mm |
| Scan time | 8 seconds |
| Installation type | Flush-mount, recessed into floor |
| Operation | Drive-over at low speed, max 10 km/h / 6 mph |
| Measurement units | mm or 1/32 inch |
| Output | Tread depth + traction score by wheel and zone |
| Compliance and warranty | Requirements and terms vary by region and configuration; confirm on quotation. |
TA100FMT measurement and installation details
The published configuration covers measurement accuracy, scan time, recessed installation, operating speed, measurement units and tread/traction report output. Final civil-work and regional configuration are confirmed on quotation.
Accuracy±0.2 mmLaser measurement precision
Scan time8 secondsFull tread + traction scan
InstallFlush mountRecessed into drive lane
SpeedUp to 10 km/hSlow drive-over operation
Flush-mount tire inspection
TA100FMT is the clean-floor version of the TreadPlus drive-over tire inspection system. It is designed for new-build facilities and major renovations where a floor recess can be prepared.
Invisible to service flow
Once installed, the scanner sits flush with the drive lane so vehicles pass over without ramp profile. It supports inspection lanes, dealership service drives and high-volume service lanes where traffic flow matters.
Configuration notes
- Measurement accuracy±0.2 mm
- Scan time8 seconds
- Installation typeFlush-mount, recessed into floor
- OperationDrive-over at low speed, max 10 km/h / 6 mph
- Measurement unitsmm or 1/32 inch
- OutputTread depth + traction score by wheel and zone
Prepare laneInstall recessed base/floor opening
Drive overVehicle crosses flush scanner
MeasureLaser sensors scan full tread face
ReportPer-wheel and per-zone tire condition output
TA100FMT frequently asked questions
Product-specific answers based on the current published configuration.
What is the difference between TA100FMT and TA100SMT?
TA100FMT is recessed into the floor for a flush lane surface, while TA100SMT is installed on top of the existing floor.
What is the published drive-over speed?
The current public specification lists low-speed operation up to 10 km/h or 6 mph.
Can results be shown in metric and imperial units?
Yes. The published configuration supports millimetres and 1/32-inch tread-depth display.
TA100FMT English documentation.
Request the current approved brochure, user manual, installation information or parts reference for this model.
TA100FMT software, reports and related inspection resources
Continue through the product, platform and learning paths.
Download TA100FMT brochures and manuals
Request the latest brochure, specification summary and quotation notes for this model. Product configuration and regional availability should be confirmed before publishing or quoting.